HP NetServer LP 2000r HP Netserver Ultra3 SCSI HBA Guide - Page 26

Display <Ctrl> <A> Messages during BIOS Initialization

Get HP NetServer LP 2000r PDF manuals and user guides View all HP NetServer LP 2000r manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

• Reset SCSI Bus at IC Initialization-(Default: Enabled) When set to Enabled, the SCSI host bus adapter generates a SCSI bus reset during its power-on initialization and after a hard reset. • Display Messages during BIOS Initialization-(Default: Enabled) When set to Enabled, the SCSI host bus adapter BIOS displays the Press for SCSISelect (TM) Utility! message on your screen during system bootup. If this setting is disabled, you can still invoke the SCSISelect Utility by pressing after the SCSI host bus adapter BIOS banner appears. • Extended BIOS Translation for DOS Drives > 1 GByte-(Default: Enabled) When set to Enabled, provides an extended translation scheme for SCSI hard disks with capacities greater than 1 GByte. This setting is necessary only for MS-DOS 5.0 or above; it is not required for other operating systems, such as NetWare or UNIX. CAUTION Changing the translation scheme destroys all data on the drive. Be sure to back up the data before changing the translation scheme. Use the MS-DOS Fdisk command to partition a disk larger than 1 GByte controlled by the SCSI host bus adapter BIOS, when using DOS, Windows 3.1.x, or Windows 95/98. • Verbose/Silent Mode-(Default: Verbose) When set Verbose, the SCSI host bus adapter BIOS displays the host adapter model on the screen during system bootup. When set to Silent, the message will not be displayed during bootup. • Host Adapter BIOS (Configuration Utility Reserves BIOS Space)- (Default: Enabled) Enables or disables the SCSI host bus adapter BIOS. Leave at Enabled to allow the SCSI host bus adapter BIOS to scan and initialize all SCSI devices. Set to Disabled: Not scan if the devices on the SCSI bus (for example, CD-ROM drives) are controlled by software drivers and do not need the BIOS, and you do not want the BIOS to scan the SCSI bus. Set to Disabled: Scan Bus if you do not need the BIOS, but you want it to scan the SCSI devices on the bus. 20

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
20
•
Reset SCSI Bus at IC Initialization
—(Default:
Enabled
) When set to
Enabled
, the SCSI host bus adapter generates a SCSI bus reset during its
power-on initialization and after a hard reset.
•
Display <Ctrl> <A> Messages during BIOS Initialization
—(Default:
Enabled
) When set to
Enabled
, the SCSI host bus adapter BIOS displays
the
Press <Ctrl> <A> for SCSISelect (TM) Utility!
message on your screen
during system bootup. If this setting is disabled, you can still invoke the
SCSI
Select
Utility by pressing
<Ctrl> <A>
after the SCSI host bus
adapter BIOS banner appears.
•
Extended BIOS Translation for DOS Drives > 1 GByte
—(Default:
Enabled
) When set to
Enabled
, provides an extended translation scheme
for SCSI hard disks with capacities greater than 1 GByte. This setting is
necessary only for MS-DOS 5.0 or above; it is not required for other
operating systems, such as NetWare or UNIX.
Use the MS-DOS
Fdisk
command to partition a disk larger than 1 GByte
controlled by the SCSI host bus adapter BIOS, when using DOS, Windows
3.1.x, or Windows 95/98.
•
Verbose/Silent Mode—(Default:
Verbose)
When set Verbose, the SCSI
host bus adapter BIOS displays the host adapter model on the screen
during system bootup. When set to Silent, the message will not be
displayed during bootup.
•
Host Adapter BIOS (Configuration Utility Reserves BIOS Space)
—
(Default:
Enabled
) Enables or disables the SCSI host bus adapter BIOS.
Leave at
Enabled
to allow the SCSI host bus adapter BIOS to scan and
initialize all SCSI devices.
Set to
Disabled: Not scan
if the devices on the SCSI bus (for
example, CD-ROM drives) are controlled by software drivers and do not
need the BIOS, and you do not want the BIOS to scan the SCSI bus.
Set to
Disabled: Scan Bus
if you do not need the BIOS, but you want it to
scan the SCSI devices on the bus.
CAUTION
Changing the translation scheme destroys all data on the
drive. Be sure to back up the data before changing the
translation scheme.