HP NetServer LP 2000r HP Netserver Ultra3 SCSI HBA Guide - Page 65
Using NetWare and the Host Adapter
View all HP NetServer LP 2000r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Sample Load Commands Here is a simple load command with no option switches (if loaded from drive A): load a:\netware\adpt160m.ham If an error message appears when attempting to load the driver, refer to "Troubleshooting" on page 63. Here is an example of the adpt160m.ham driver being loaded with command line options (if loaded from drive A): load a:\netware\adpt160m.ham verbose=y slot=2 Using NetWare and the Host Adapter This section contains useful information on using NetWare and your host adapter. Using Removable Media The adpt160m.ham driver module fully supports removable-media disk drives, including magneto-optical drives. Removable media is treated as a standard SCSI hard disk, with some exceptions: • The driver only recognizes and registers media with 512 bytes/sector. • NetWare allows you to mount/dismount the media, and to lock/unlock the media. NetWare's monitor.nlm program supports several removable-media options. Follow these steps to view and configure these options: 1. Load monitor.nlm to display the various options. 2. Select Disk Information. All system disk drives appear. 3. Select the removable-media device. The following drive status items appear: 59