HP NetServer LP 2000r HP Netserver Ultra3 SCSI HBA Guide - Page 9

Installing the HP Ultra3 SCSI Host Bus Adapter

Get HP NetServer LP 2000r PDF manuals and user guides View all HP NetServer LP 2000r manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

Installing the HP Ultra3 SCSI Host Bus Adapter 1. Discharge any static electricity build-up before handling the SCSI host bus adapter by touching a grounded metal object (like the exposed metal parts on the back of your HP Netserver). WARNING Turn OFF power to the HP Netserver and disconnect the power cord. 2. After you turn off your HP Netserver and unplug the power cord, remove the cover from the Netserver. 32-bit PCI Slot 64-bit PCI Slot Figure 1-3. 32-bit and 64-bit Expansion Slots 3. Locate an unused 64-bit PCI expansion slot and remove the expansion slot cover. If the HP Netserver does not have a 64-bit slot, you can install the host adapter in a 32-bit PCI slot. (The expansion slot must be compliant with PCI Rev. 2.1 or higher and must support Bus Mastering.) 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
3
Installing the HP Ultra3 SCSI Host Bus Adapter
1. Discharge any static electricity build-up before handling the SCSI host bus
adapter by touching a grounded metal object (like the exposed metal parts on
the back of your HP Netserver).
2. After you turn off your HP Netserver and unplug the power cord, remove the
cover from the Netserver.
Figure 1-3. 32-bit and 64-bit Expansion Slots
3. Locate an unused 64-bit PCI expansion slot and remove the expansion slot
cover. If the HP Netserver does not have a 64-bit slot, you can install the host
adapter in a 32-bit PCI slot. (The expansion slot must be compliant with PCI
Rev. 2.1 or higher and must support Bus Mastering.)
WARNING
Turn OFF power to the HP Netserver and disconnect the
power cord.
32-bit PCI Slot
64-bit PCI Slot