HP P4000 HP Smart Array SAS controllers for Integrity servers support guide - Page 123
Slot z Drive Array - Array Accelerator is
View all HP P4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Table C-1 Smart Array controller POST error codes (continued) Error code 1794 Description Level Corrective action Slot z Drive Array - Array Accelerator Battery Charge Low. Array Accelerator Posted-Write Cache is temporarily disabled. Array Accelerator will be reenabled when battery reaches full charge (or: Array Accelerator batteries have failed and should be replaced) Informational if Replace the cache battery, if battery bad; necessary. otherwise None 1795 Slot z Drive Array - Array Accelerator Configuration Error. Data does not correspond to this drive array Array Accelerator is temporarily disabled. Critical Check the array configuration. 1796 Slot z Drive Array - Array Accelerator is Not Responding. Array Accelerator is temporarily disabled. Critical Check the cache module, and replace if necessary. 1797 Slot z Drive Array - Array Accelerator Read Error Critical Occurred. Data in Array Accelerator has been lost. Array Accelerator is disabled. The cache module has failed. Contact your HP service representative for assistance. 1798 Slot z Drive Array - Array Accelerator Self-Test Error Occurred. Array Accelerator is disabled. Critical The cache module has failed. Contact your HP service representative for assistance. 1799 Slot z Drive Array - Drive(s) Disabled due to Array Accelerator Data Loss. Critical Press F1 to continue with logical drives disabled. See Chapter 4 (page 65). Press F2 to accept data loss and re-enable logical drives. Warning: Pressing F2 erases all data in the array. Be sure you have a valid, current backup of the affected logical drives before selecting this option. 1799 179A-Slot z Drive Array - Array Accelerator is disabled Unknown Problem Code). Array accelerator is temporarily (permanently ) disabled. Critical The cache module has failed. Contact your HP service representative for assistance. POST error codes 123