HP P4000 HP Smart Array SAS controllers for Integrity servers support guide - Page 13
Smart Array P400 controller board runtime LEDs - driver
View all HP P4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Figure 1-3 Smart Array P400 controller board runtime LEDs 18 Table 1-1 Interpreting Smart Array P400 Runtime LEDs LED ID 1 2 3 4 5 6 7 8 Color Amber Amber Green Green Green Green Green Green Name CR14 CR13 CR3 CR8 CR5 CR6 CR4 CR7 LED name and interpretation Controller lockup LED. Disk Failure LED. A physical disk connected to the controller has failed. See the Fault LED on each disk to determine the failed disk. Activity LED for SAS port 2I. Activity LED for SAS port 1I. Command Outstanding LED. The controller is working on a command from the host driver. Heartbeat LED. This LED flashes every 2 seconds to indicate controller health. Gas Pedal LED. This LED, with item 8 (CR7), indicates the amount of controller CPU activity. See Table 1-2. Idle Task LED. This LED, with item 7 (CR4), indicates the amount of controller CPU activity. See Table 1-2. Table 1-2 Determining the P400 controller CPU activity level LED 7 Status Off Flashing On Steady On steady LED 8 Status Flashing Off Off On Steady Controller CPU activity level 0 to 25% 25 to 50% 50% to 75% 75% to 100% NOTE: During server power on, each runtime LED illuminates randomly until POST completes. Smart Array P400 controller features 13