HP PSC 1600 HP PSC 1600 All-in-One series User Guide - Page 51
Set the copy paper type, Paper type, Suggested paper size settings, Copy Menu, Start Copy Black
View all HP PSC 1600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Chapter 7 Paper type Copier, multi-purpose, or plain papers Inkjet papers Iron-on transfers Letterhead Photo papers Hagaki cards Transparency films Suggested paper size settings Letter or A4 Letter or A4 Letter or A4 Letter or A4 10 x 15 cm or 10 x 15 cm Borderless 13 x 18 cm or 13 x 18 cm Borderless 4 x 6 inches or 4 x 6 Borderless 5 x 7 inches or 5 x 7 Borderless Letter or Letter Borderless A4 or A4 Borderless L-size or L-size Borderless (Japan only) Hagaki or Hagaki Borderless (Japan only) Letter or A4 Set the copy paper type You can set the paper type on your HP All-in-One. The default paper type setting for copying is Automatic, which causes the HP All-in-One to detect the type of paper in the paper tray. If you copy onto special papers, or if you experience poor print quality by using the Automatic setting, you can set the paper type manually from the Copy Menu. Note The HP All-in-One cannot automatically detect transparency film. For best results, set the paper type to Transparency before copying onto transparency film. 1. Make sure you have paper loaded in the paper tray. 2. Load your original face down on the right front corner of the glass. 3. Press Copy Menu until Copy Paper Type appears. 4. Press until the appropriate paper type appears, and then press OK. 5. Press Start Copy Black or Start Copy Color. Refer to the following table to determine which paper type setting to choose based on the paper loaded in the paper tray. Paper type Copier paper or letterhead HP Bright White Paper HP Premium Plus Photo Paper, Glossy Control panel setting Plain Paper Plain Paper Premium Photo Use the copy features 48 HP PSC 1600 All-in-One series