HP Scanjet N7000 User Guide - Page 44
Supported paper sizes and types
View all HP Scanjet N7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Table 2-7 Inappropriate types of documents (continued) Example Document type Carbon paper Example Document type Coated paper Extremely thin, translucent paper Photos Paper with adhesive notes or flags attached Overhead transparencies Papers that are stuck together Paper where the toner has not fully dried, or with wet substances such as glue or correction fluid ● Smooth out any folds or curls in your documents before placing them into the feeder. If the leading edge of a document is curled or folded, it might cause a paper jam. ● To scan fragile documents (such as photos or documents on wrinkled or very lightweight paper), place the document in a clear, heavyweight document sleeve no wider than 216 mm (8.5 in) before loading them into the input tray. TIP: If you do not have an appropriately-sized document sleeve, consider using a sleeve intended for use in a ring binder. Trim the ring-side edge so the sleeve is no more than 216 mm (8.5 in) wide. Also, disable multipick detection before scanning, as the document sleeve will trigger a multipick error. ● Make sure that the document feeder hatch is securely latched. To properly close the hatch, press firmly on both sides of the hatch. ● Adjust the paper guides to the width of the documents. Make sure that the paper guides touch the edges of the original. If there is any clearance between the paper guides and the edges of the documents, the scanned image might be skewed. ● When placing a stack of documents into the feeder, gently set the stack in the input tray. Do not drop the stack into the tray and do not tap the top edge of the stack after you have placed the stack in the input tray. ● Clean the scan rollers if the rollers are visibly dirty or after scanning a document written with or written on with pencil. Supported paper sizes and types Supported paper types and sizes for the product are shown below. ● U.S.-Letter: 215.9 x 279.4 mm (8.5 x 11 in) ● U.S.-Legal: 215.9 x 355.6 mm (8.5 x 14 in) ● U.S.-Executive: 184.2 x 266.7 mm (7.25 x 10.5 in) ● ISO A4: 210 x 297 mm (8.3 x 11.7 in) 34 Chapter 2 Use the scanner ENWW