HP Scanjet N7000 User Guide - Page 54
Start a scan from the hardware, Scan from the control panel buttons (2000 s2 and 3000 s4 models)
View all HP Scanjet N7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Start a scan from the hardware Learn how to start a scan from the control panel. ● Scan from the control panel buttons (2000 s2 and 3000 s4 models) ● Scan from the control panel buttons (5000 s5 and 7000 s3 models) ● Scan from the touch screen (N4000 snw1 and N7000 snw1 models) Scan from the control panel buttons (2000 s2 and 3000 s4 models) To scan from the control panel, follow these steps: 1. Load the original into the input tray. 2. Press the Scan button. TIP: To cancel a scan, press the Cancel button on the control panel. Scan from the control panel buttons (5000 s5 and 7000 s3 models) To scan from the control panel, follow these steps: 1. Load the original into the input tray. 2. Use the arrow buttons to select the scan profile you want. If you refrain from selecting a profile, the scanner will use the default scan profile. 3. Press the Simplex Scan button or the Duplex Scan button. TIP: To cancel a scan, press the Cancel button on the control panel. The thick media switch is a mechanical switch on the scanner to enable or disable paper separation. Figure 2-10 Thick media switch By default, it is enabled for most media. It should be disabled before scanning folded sheets or fragile originals placed in a plastic carrier sheet. Only one folded page or plastic carrier sheet can be loaded at any one time. 44 Chapter 2 Use the scanner ENWW