HP StorageWorks 300 HP StorageWorks 300 Virtual Library System user guide (AH1 - Page 110
Table 7 CLI con, guration commands, Command, Usage
![]() |
View all HP StorageWorks 300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Table 7 CLI configuration commands Command Usage 1 updateFC Changes the default FC host port connection settings. Where the options are: -a - ID number of node to modify (0, ...) (optional) -i - Fibre Channel index (0, 1, ...) (required) -l - If attached in arbitrated loop mode, specifies a hard ALPA value between 0 and 125. A value of -1 specifies a dynamically assigned ALPA. If not attached to an arbitrated loop, this parameter is ignored (required) -r - Port number of the FC port to modify (required) -s - Preferred speed(s) (0-Auto, 1-One GB, 2-Two GB, 4-Four GB, or 10-Ten GB) (required) -t - Preferred topology(s) (0-Auto, 1-Point to Point, 2-Loop, 3-Fabric, or 4-Public Loop) (required) -h - Displays command usage information (optional) setOverSubscription Enables or disables oversubscription and specifies the percent storage remaining for notification. Where the options are: -e - Enable/disable oversubscription (0-Disabled or 1-Enabled) (required) -p - Percentage of capacity remaining for alert notification (required) -h - Displays command usage information (optional) getOverSubscription Returns whether the oversubscription feature is enabled or disabled and the capacity remaining percentage for notification alert. Oversubscription is enabled when "enabled = 0". Oversubscription is disabled when "enabled = 1". getLunMap Returns existing LUN mapping configured on the VLS for the LUN specified. Where the options are: -a - Number of the node (0, ...) (required) -l - LUN number of device whose LUN map you wish to view (required) -h - Displays command usage information (optional) getLibTypes Returns a list of available library emulation types. Displays each library emulation's name, type, product, revision, and vendor information. createLibrary Creates a new library with the specified maximum number of cartridge slots, input/export ports, and tape drives. Where the options are: -a - Node ID of the node on which the library emulation will reside (0, ...) (required) -l - LUN number to assign to library (-1 to 128) (optional) -n - Maximum number of tape drives (required) -p - Product (spaces allowed) (MSL6000, ...) (required) -pm - FC port to which this library is mapped (0, 1, ...) (required) -pt - Maximum number of input/export ports (required) -r - Revision (0430, ...) (required) -sl - Maximum number of cartridge slots (required) -t - Library type name (required) -v - Vendor (HP, ...) (required) -y - Library type to emulate (2051, ...) (required) -h - Displays command usage information (optional) 110 CLI command set
![](/manual_guide/products/hewlettpackard-storageworks-300-hp-storageworks-300-virtual-library-user-guide-ah13896002-2006-48335fb/110.png)