HP StorageWorks 300 HP StorageWorks 300 Virtual Library System user guide (AH1 - Page 111
Command, Usage, Data compression 0=Disabled, 1=Enabled
![]() |
View all HP StorageWorks 300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Command getLibs getLib getLibOpenSlots destroyLib getTapeTypes createTapeDrive getTapeDrives getTapeDrive Usage 1 Returns a list of the libraries defined on the VLS. Returns a summary of the specified library. Where the options are: -a - Name of library (Library_0, ....) (required) -h - Displays command usage information (optional) Returns a summary of the slot status for each defined library (open:used:total). Deletes the specified library from the VLS. This operation takes several minutes to perform. Where the options are: -a - Node number on which the library emulation resides (0, ...) (optional) -f - Force. Do the destroy without a prompt (optional) -l - LUN number of the library to delete (required) -h - Displays command usage information (optional) Returns a list of all tape drive emulation types available. Displays each tape drive emulation's name, type, product, revision, and vendor information. Creates the specified number of tape drives of a particular type and associates them with the specified library. Where the options are: -a - Node ID of node on which the tape drive emulation will reside (0, ....) (required) -c - Data compression (0=Disabled, 1=Enabled) (required) -l - LUN number to assign to tape drive (-1 to 128) (optional) -la - Node number on which the library emulation of the library to associate with the tape drive(s) resides (0 to 3) (required) -ll - LUN number of library with which to associate tape drive (0, 1, ...) (required) -n - Number of tape drives (required) -p - Product (DLT7000, SDLT320, ...) (required) -pm - FC port to which this tape drive is mapped. (required) -r - Revision (R138, ...) (required) -t - Tape drive type name (required) -v - Vendor (Quantum, HP, ...) (required) -y - Tape drive type (3, 4, ...) (required) -h - Displays command usage information (optional) Returns a list of all tape drives defined in the VLS. Where the options are: -a - Library name (Library_0, ...) (required) -h - Displays command usage information (optional) Returns the configuration information for the specified tape drive. Where the options are: -a - Name of desired tape drive (TapeDrive_1, ...) (required) -l - Name of library with which tape drive is associated (Library_0, ...) (required) -h - Displays command usage information (optional) HP StorageWorks 111
![](/manual_guide/products/hewlettpackard-storageworks-300-hp-storageworks-300-virtual-library-user-guide-ah13896002-2006-48335fb/111.png)