HP StorageWorks 300 HP StorageWorks 300 Virtual Library System user guide (AH1 - Page 29

Attach rails to the 2824 switch, Switch 2824 rail installation, front, back

Get HP StorageWorks 300 - Virtual Library System EVA Gateway PDF manuals and user guides View all HP StorageWorks 300 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

11194 Figure 5 Switch 2824 rail installation, front c. At the front of the rack, slide the clip onto the rack so that the hexagonal hole is facing out and align the holes in the clip with the proper hole in the rack. Then align the rail hole with these holes. 2 1 11195 Figure 6 Switch 2824 rail installation, back d. Push the screw through the rail, clip, and rack, then into the nut. Tighten the screw to secure the rail to the rack (see Figure 6). e. Repeat these tasks for the rail on the other side of the rack. Attach rails to the 2824 switch To attach the rails to the 2824 switch: 1. Align the inner rail with the switch so that the perpendicular screw hole faces away from the switch but is parallel to the switch bezel (face-plate). The two holes at the front of the rail must align with the two holes at the front of the switch (see Figure 7). HP StorageWorks 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
11194
Figure 5 Switch 2824 rail installation, front
c.
At the front of the rack, slide the clip onto the rack so that the hexagonal hole is facing out
and align the holes in the clip with the proper hole in the rack. Then align the rail hole with
these holes.
11195
1
2
Figure 6 Switch 2824 rail installation, back
d.
Push the screw through the rail, clip, and rack, then into the nut. Tighten the screw to secure
the rail to the rack (see
Figure 6
).
e.
Repeat these tasks for the rail on the other side of the rack.
Attach rails to the 2824 switch
To attach the rails to the 2824 switch:
1.
Align the inner rail with the switch so that the perpendicular screw hole faces away from the switch
but is parallel to the switch bezel (face-plate). The two holes at the front of the rail must align with the
two holes at the front of the switch (see
Figure 7
).
HP StorageWorks
29