HP StorageWorks 300 HP StorageWorks 300 Virtual Library System user guide (AH1 - Page 123
Node LEDs and internal health LED combinations
View all HP StorageWorks 300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Item Description 7 PPM 1 failure Status • Amber = PPM has failed. • Off = PPM is operating normally. 8 PPM 2 failure • Amber = PPM has failed. • Off = PPM is operating normally. 9 Processor 2 failure • Amber = Processor has failed. • Off = Processor is operating normally. 10 Power supply signal connector • Amber = Power supply signal cable interlock failure is not connected. • Off = Power supply signal cable is connected. 11 Standby power good • Green = Auxiliary power is applied. • Off = Auxiliary power is not applied. 12 Power supply fan module failure • Amber = One fan in this module has failed. • Red = Multiple fans in this module have failed. • Off = All fans in this module are operating normally. 13 System diagnostic 14 Online spare memory Refer to the HP Remote Lights-Out Edition II User Guide. • Amber = Failover has occurred. Online spare memory is in use. • Green = Online spare memory is enabled, but not in use. • Off = Online spare memory is disabled. 15 Riser interlock • Amber = PCI riser assembly is not seated. • Off = PCI riser assembly is seated. Node LEDs and internal health LED combinations When the internal health LED on the front panel of the node illuminates either amber or red, the node is experiencing a health event. Combinations of illuminated system board LEDs and the internal health LED indicate node status. HP StorageWorks 123