HP StorageWorks 300 HP StorageWorks 300 Virtual Library System user guide (AH1 - Page 124
System board LED, and color, Internal Health, Status, Fan module Amber
View all HP StorageWorks 300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
System board LED and color Processor failure, socket X (Amber) Internal Health LED Color Red Amber Processor failure, Red both sockets (Amber) PPM failure (Amber) Red DIMM failure, slot X Red (Amber) Amber DIMM failure, all slots in one bank (Amber) Overtemperature (Amber) Red Amber Red Riser interlock Red (Amber) Online spare memory (Amber) Amber Power converter Red module interlock (Amber) Fan module (Amber) Amber Fan module (Red) Red Power supply signal Red interlock (Amber) Status One or more of the following conditions may exist: • Processor in socket X has failed. • Processor in socket X failed over to the offline spare. • Processor X is not installed in the socket. • Processor X is unsupported. • ROM detects a failed processor during POST. Processor in socket X is in a pre-failure condition. Processor types are mismatched. PPM has failed. • DIMM in slot X has failed. • DIMM in slot X is an unsupported type, and no valid memory exists in another bank. • DIMM in slot X has reached single-bit correctable error threshold. • DIMM in slot X is in a pre-failure condition. • DIMM in slot X is an unsupported type, but valid memory exists in another bank. No valid or usable memory is installed in the system. The Health Driver has detected a cautionary temperature level. The node has detected a hardware critical temperature level. The PCI riser board assembly is not seated. Bank X failed over to the online spare memory bank. The power converter module is not seated. A redundant fan has failed. The minimum fan requirements are not being met in one or more of the fan modules. One or more fans have failed or are missing. The power supply signal cable is not connected to the system board. 124 Component identification