HP StorageWorks 300 HP StorageWorks 300 Virtual Library System user guide (AH1 - Page 76
Create Virtual Library Wizard window 6 of 12, Tape Drives, Enable Compression
View all HP StorageWorks 300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Figure 42 Create Virtual Library Wizard window (6 of 12) 6. Enter the number of tape drives you want to create in the library at this time in the Tape Drives box, if different from the default value. You can add more tape drives to the library later. The Tape Drives box defaults to the standard number of drives for the library type. NOTE: All the tape drives created at one time are mapped to the same FC host ports. Make sure to load-balance the tape drives across the FC host ports to obtain maximum performance. Tape drives in a library do not have to be mapped to the same port as the library. 7. To enable data compression for the tape drive(s), select Enable Compression. Data compression (2:1) is performed only on data handled by tape drives with data compression enabled. Data compression allows the VLS to store more data. NOTE: A tape drive created with data compression enabled cannot be changed later so that data compression is disabled. 8. Click Create Tape Drive. A summary window opens and displays details about the tape drive(s) created (Figure 43). 76 Configuration