HP Surestore Tape Library Model 10/180 HP Surestore Bridge FC 2/1 LV and FC 4/ - Page 101

Active Fabric The Active Fabric Configuration menu allows for enabling/disabling the Server-Free Backup Mode and for configuring the number of controller LUNs visible to an operating system communicating with the bridge. Current active fabric configuration indicates whether server-free back-up mode is enabled as well as the number of controller LUNs being used by the bridge. Active Fabric Configuration Menu Version X.X XXXX Link Up Current Active Fabric Configuration: Server Free Backup Mode: OFF Number of Controller LUNs (0-4): 1 1) Toggle Server Free Backup Mode 2) Change number of Controller LUNs NOTE: FC DISCOVERY mode must be enabled when Server Free Backup Mode is ON to access FC targets. X) Return to previous menu ■ Select 1) to toggle the Server-Free Backup Mode between ON or OFF. When set to ON, server-free backup capability is enable on the bridge so that it can accept Extended Copy commands. ■ Select 2) to change the number of controller LUNs reported by the bridge. This value can be set to a number of 0 to 4. Note When Server-Free Backup Mode is set to ON, be sure FC Discovery is also enabled so that the router will have access to FC targets. Chapter 4 Chapter 4 Perform Configuration 103