HP Surestore Tape Library Model 10/180 HP Surestore Bridge FC 2/1 LV and FC 4/ - Page 170
HP-UX Configuration, If MC/ServiceGuard is installed, ATS should
View all HP Surestore Tape Library Model 10/180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 170 highlights
HP-UX Configuration Use one of the Fibre Channel cards listed in Table 8 on page 48. You must also install the fabric driver for the appropriate platform. Note Always use the latest release of fabric drivers. Figure 72 Configure a single path for each tape drive. The device files must be manually selected or created, and configured properly in the software. In this example, two tape drives are configured from the HP-UX host, one from each HBA. The following 'ioscan' shows the paths and the corresponding device files. Sample ioscan Output # # ioscan -fnH 1/2/0/0.2 Class I H/W Path Driver S/M State H/W Type Description fcp 1 1/2/0/0.2 fcp CLAIMED INTERFACE FCP Domain ext-bus 17 1/2/0/0.2.22.255.0 fcpdev CLAIMED INTERFACE FCP Device Interface target 7 1/2/0/0.2.22.255.0.0 tst CLAIMED DEVICE autoch 2 1/2/0/0.2.22.255.0.0.0 schgr CLAIMED DEVICE HP A5597A tape 15 1/2/0/0.2.22.255.0.0.1 stape CLAIMED DEVICE QUANTUM DLT8OOO /dev/rmt/drive-1 tape 16 1/2/0/0.2.22.255.0.0.2 stape CLAIMED DEVICE QUANTUM DLT8000 ctl 167 1/2/0/0.2.22.255.0.0.3 sctl CLAIMED DEVICE HP A4688A # # # # ioscan -fnH 1/4/0/0.2 Class I H/W Path Driver S/W State H/W Type Description fcp 4 1/4/0/0.2 fcp CLAIMED INTERFACE FCP Domain ext-bus 23 1/4/0/0.2.22.255.0 fcpdev CLAIMED INTERFACE FCP Device Interface target 8 1/4/0/0.2.22.255.0.0 tgt CLAIMED DEVICE autoch 3 1/4/0/0.2.22.255.0.0.0 schgr CLAIMED DEVICE HP A5597A tape 25 1/4/0/0.2.22.255.0.0.1 stape CLAIMED DEVICE QUANTUM DLT8OOO tape 26 1/4/0/0.2.22.255.0.0.2 stape CLAIMED DEVICE QUANTUM DLT8OOO /dev/rmt/drive-2 ctl 79 1/4/0/0.2.22.255.0.0.3 scti CLAIMED DEVICE HP A4688A # Note If MC/ServiceGuard is installed, ATS should not be configured for SAN environments with a fabric switch. 172 HP-UX Configuration Chapter 7