HP Surestore Tape Library Model 10/180 HP Surestore Bridge FC 2/1 LV and FC 4/ - Page 217
Eighty-byte NULL terminated ASCII string., Reset Bridge
![]() |
View all HP Surestore Tape Library Model 10/180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 217 highlights
Reset Bridge ■ When used with the MODE SENSE command, the Reset Bridge bit is not defined. ■ When used with the MODE SELECT command, setting the Reset Bridge bit to a one when the PS bit in the mode page and the SP bit in the CDB are also set to one causes the bridge subsystem to be reset and reboot itself. ■ Resetting the bridge will cause the bridge to be booted utilizing any new parameters that have been updated. Firmware Version ■ Eighty-byte NULL terminated ASCII string. Appendix B Mode Page Descriptions 219
![](/manual_guide/products/hewlettpackard-surestore-tape-library-model-10180-hp-surestore-bridge-fc-21-lv-fc-41-hv-installation-operations-guide-6d7bf0e/217.png)
Appendix B
Mode Page Descriptions
219
Reset Bridge
■
When used with the MODE SENSE command, the Reset Bridge bit is not
defined.
■
When used with the MODE SELECT command, setting the Reset Bridge bit
to a one when the PS bit in the mode page and the SP bit in the CDB are
also set to one causes the bridge subsystem to be reset and reboot itself.
■
Resetting the bridge will cause the bridge to be booted utilizing any new
parameters that have been updated.
Firmware Version
■
Eighty-byte NULL terminated ASCII string.