HP Surestore Tape Library Model 10/180 HP Surestore Bridge FC 2/1 LV and FC 4/ - Page 167
Device & Media Management, Logical Device Editor - Drive
![]() |
View all HP Surestore Tape Library Model 10/180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 167 highlights
Figure 69 2. From the Device & Media Management screen: select [Edit] > [Create] > [SCSI-II Library] Configure the library and drives so all nodes on the SAN can share them: - Configure a single tape library - Control the robotic arm from a single server, such as the cell server - Do not check the SCSI Reserve/Release box (see Figure 69) Logical Device Editor - SCSI-II Library Chapter 7 3. Configure each tape drive for each host that will access it. In this example with two tape drives and two hosts, four tape drives must be configured. 4. Select a Library device in the Device & Media Management screen shown in Figure 68 on page 168, then [right click] and select [Create] > [Drive]. The Logical Device Editor - Drive screen shown in Figure 70 on page 170 appears. Chapter 7 Omniback Configuration 169
![](/manual_guide/products/hewlettpackard-surestore-tape-library-model-10180-hp-surestore-bridge-fc-21-lv-fc-41-hv-installation-operations-guide-6d7bf0e/167.png)