HP Surestore Tape Library Model 10/180 HP Surestore Bridge FC 2/1 LV and FC 4/ - Page 53
How to Assemble the L-brackets to the Fibre Bridge
![]() |
View all HP Surestore Tape Library Model 10/180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
How to Assemble the L-brackets to the Fibre Bridge 1. Facing the back of the bridge, position the first L-bracket with the mounting tab toward the back of the rack and pointing away from the bridge, as shown in Figure 18. 2. Insert the 6-32 screws through the second and fourth holes from the mounting tab and tighten (see Figure 18). 3. Follow the same procedure for the second L-bracket. Figure 18 Assembling L-brackets to the Fibre Bridge Chapter 3 Chapter 3 Installing the HP Surestore Bridge 55
![](/manual_guide/products/hewlettpackard-surestore-tape-library-model-10180-hp-surestore-bridge-fc-21-lv-fc-41-hv-installation-operations-guide-6d7bf0e/53.png)
Chapter 3
Installing the HP Surestore Bridge
55
Chapter 3
How to Assemble the L-brackets to the Fibre Bridge
1.
Facing the back of the bridge, position the first L-bracket with the mounting
tab toward the back of the rack and pointing away from the bridge, as
shown in
Figure 18
.
2.
Insert the 6-32 screws through the second and fourth holes from the
mounting tab and tighten (see
Figure 18
).
3.
Follow the same procedure for the second L-bracket.
Figure 18
Assembling L-brackets to the Fibre Bridge