HP Surestore Tape Library Model 10/180 HP Surestore Bridge FC 2/1 LV and FC 4/ - Page 134
Main Menu > Configuration > Fibre Channel, World Wide Node Name High
View all HP Surestore Tape Library Model 10/180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
Figure 42 Main Menu > Configuration > Fibre Channel This menu allows for setting the Fibre Channel Address method, Hard Address value, discovery mode, WWN overrides and FC Port mode. Fibre Channel Configuration Page Note For In-Band Management to be operational, WWN naming schemes MUST be compliant with IEEE Fibre Channel Format 1, where the leftmost hexadecimal character (the NAA field) of the WWN is '1'. Further, the upper nibble of the third byte (the sixth hexadecimal value from the right) must be a value of '0' or'1'. ■ World Wide Node Name High is normally not changed. ■ World Wide Node Name Low is normally not changed. 136 Main Menu Chapter 6
136
Main Menu
Chapter 6
Main Menu > Configuration > Fibre Channel
This menu allows for setting the Fibre Channel Address method, Hard Address
value, discovery mode, WWN overrides and FC Port mode.
Figure 42
Fibre Channel Configuration Page
Note
For In-Band Management to be operational, WWN naming schemes
MUST be compliant with IEEE Fibre Channel Format 1, where the left-
most hexadecimal character (the NAA field) of the WWN is '1'.
Further, the upper nibble of the third byte (the sixth hexadecimal value
from the right) must be a value of '0' or'1'.
■
World Wide Node Name High
is normally not changed.
■
World Wide Node Name Low
is normally not changed.