HP Surestore Tape Library Model 10/180 HP Surestore Bridge FC 2/1 LV and FC 4/ - Page 84
Baud Rate, Fibre Channel, This menu allows for setting the Fibre Channel address method, hard address
![]() |
View all HP Surestore Tape Library Model 10/180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Baud Rate Fibre Channel This menu changes the baud rate used on the serial port. Select 1) - 5) for the appropriate baud rate setting. If you are using the autobaud feature, it may not be necessary to set a baud rate. See Autobaud Feature on page 65 for more information. Baud Rate Configuration Menu Version X.X XXXX 1) * 9600 3) 38400 5) 115200 2) 19200 4) 57600 X) Return to previous menu The asterisk (*) symbol indicates the current setting for the baud rate. This menu allows for setting the Fibre Channel address method, hard address value, discovery mode, WWN overrides and FC Port mode. Fibre Channel Configuration Menu Version 3.06 2008e Link Down 12/05/2001 09:43:33 Current Fibre Channel Configuration: World Wide Node_Name (High Low): 0x100000E0 02019E91 World Wide Port Name High: 0x100000E0 World Wide Port Name Low: 0x02219E91 Discovery Mode: Discovery OFF N_Port Mode 1) Change World Wide Node_Name High 2) Change World Wide Node_Name Low 3) Toggle Discovery Mode 4) Toggle FC Port Modes X) Return to previous menu 86 Perform Configuration Chapter 4
![](/manual_guide/products/hewlettpackard-surestore-tape-library-model-10180-hp-surestore-bridge-fc-21-lv-fc-41-hv-installation-operations-guide-6d7bf0e/84.png)