HP Surestore Tape Library Model 10/180 HP Surestore Bridge FC 2/1 LV and FC 4/ - Page 23
Fibre Bridge Components and Supported Products, Gigabit Interface Converter: 1 GBIC is pre
View all HP Surestore Tape Library Model 10/180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Chapter 1 Fibre Bridge Components and Supported Products Table 2 This section includes a list of all parts supplied with the bridge, products that Hewlett-Packard supports for use with the bridge, environmental considerations, and sample system configurations. Table 2 lists the supplied parts for the FC 2/1 LV. Table 3 on page 26 lists the supplied parts for the FC 4/1 HV. Supplied Components for the FC 2/1 LV Item Qty Description HP Surestore Bridge FC 2/1 HV SW optical GBICs Optical cable Rackmount L-brackets Rackmount Hardware Kit Stick-on rubber feet 1 2 1 2 1 pkg 4 Fibre bridge Gigabit Interface Converter: 1 GBIC is preinstalled in the bridge, 1 is included in the accessory pack. 16 meter FC optical cable, 50 um Right and left L-brackets are used for installing the bridge into a rack. ■ Four 6-32 0.375 inch screw pan head pozidrive with lock washers (for mounting L-brackets to the bridge). ■ Four 10-32 0.625 inch screw pan head pozidrive (for mounting L-brackets to the HP rack). ■ Four 10-32 inch clipnuts (for mounting L-brackets to the HP rack). ■ Four M6-1 16mm screws (for mounting L-brackets to a Compaq rack). ■ Four M6-1 w/10mm cage nuts (for mounting L-brackets to a Compaq rack). Rubber pads for the bottom of the Fibre bridge. (Not required for rackmount installation.) Chapter 1 Fibre Bridge Components and Supported Products 25