HP Surestore Tape Library Model 10/180 HP Surestore Bridge FC 2/1 LV and FC 4/ - Page 74
Powering on the System, Back View of the FC 2/1 LV
![]() |
View all HP Surestore Tape Library Model 10/180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Powering on the System The bridge is configured for most Fibre Channel installations without intervention. The basic configuration uses one bridge connected directly to a Fibre Channel host bus adapter (HBA) within a host computer. In expanded configurations, the bridge may be connected to either a Fibre Channel HBA or a Fibre Channel switch or hub. ■ Before powering-on the bridge, make sure that each SCSI device is powered-on and configured to communicate over SCSI. ■ The drives within the tape library or MO jukebox need to be online and have valid SCSI IDs. Figure 35 Back View of the FC 2/1 LV Figure 36 Back View of the FC 4/1 HV 76 Powering on the System Chapter 4
![](/manual_guide/products/hewlettpackard-surestore-tape-library-model-10180-hp-surestore-bridge-fc-21-lv-fc-41-hv-installation-operations-guide-6d7bf0e/74.png)
76
Powering on the System
Chapter 4
Powering on the System
The bridge is configured for most Fibre Channel installations without
intervention. The basic configuration uses one bridge connected directly to a
Fibre Channel host bus adapter (HBA) within a host computer. In expanded
configurations, the bridge may be connected to either a Fibre Channel HBA or
a Fibre Channel switch or hub.
■
Before powering-on the bridge, make sure that each SCSI device is
powered-on and configured to communicate over SCSI.
■
The drives within the tape library or MO jukebox need to be online and
have valid SCSI IDs.
Figure 35
Back View of the FC 2/1 LV
Figure 36
Back View of the FC 4/1 HV