HP Surestore Tape Library Model 10/180 HP Surestore Bridge FC 2/1 LV and FC 4/ - Page 198

Note Indexed Mode - Controller LUNs are numbered beginning with LUN 0x50 (80d). There may be a gap between the last device and the first controller LUN. Note Host software must use the Inquiry command in order to determine which bridge LUNs are controller LUNs verses device LUNs. See the Inquiry and Report LUNs commands in the In-Band Management section of this appendix. The following is a list of the commands that are supported by the controller LUNs. All of these commands are SCSI-3 commands. Complete definitions of SCSI-3 commands can be found in the SCSI-3 standard available from the American National Standards Institute (ANSI). The following is a list of the commands that are supported by the controller LUNs. All of these commands are SCSI-3 commands. Complete definitions of SCSI-3 commands can be found in the SCSI-3 standard available from the American National Standards Institute (ANSI). General Commands: ■ REPORT LUNS Copy Manager ■ RECEIVE COPY RESULTS ■ EXTENDED COPY In-Band Management ■ LUN INQUIRY ■ MODE SELECT (6 & 10) ■ MODE SENSE (6 & 10) ■ RELEASE (6 & 10) ■ RESERVE (6 & 10) ■ TEST UNIT READY ■ WRITE BUFFER 200 Appendix B