HP Surestore Tape Library Model 10/180 HP Surestore Bridge FC 2/1 LV and FC 4/ - Page 137
Main Menu > Configuration > FC to SCSI Mapping, Enter loop, address of AL_PA, Mode Selection
View all HP Surestore Tape Library Model 10/180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
Chapter 6 Figure 44 Select an AL_PA value from the table and enter it into the field Enter loop address of AL_PA at the bottom of the screen. For more information, see Appendix C. Main Menu > Configuration > FC to SCSI Mapping This menu allows for setting the Fibre Channel Address method, Hard Address value, discovery mode, WWN overrides and FC Port mode. FC to SCSI Mapping Page ■ Mode Selection determines the mode of Fibre Channel to SCSI Mapping. The following options are available: SCC Indexed Auto-assigned, LUN priority Auto-assigned, target ID priority Auto-assigned, bus number priority SCC mode is used to address SCSI devices attached to the bridge using the SCSI-3 Controller Commands method of logical unit addressing. In this mode, the bridge will respond to FCP commands as in a SCC controller device. The FC HBA must support this addressing method. Chapter 6 Main Menu 139