HP Surestore Tape Library Model 10/180 HP Surestore Bridge FC 2/1 LV and FC 4/ - Page 107
Web Management Interface, In-Band Management
View all HP Surestore Tape Library Model 10/180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
4. Access menu options in the same way used for the serial interface. 5. To exit the Telnet session, select the [Disconnect] option from your Telnet client utility. In most Telnet utilities, this option is available as a menu item. Web Management Interface The FC 2/1 LV and FC 4/1 HV allows any standard Internet Web browser to view and change the FC 2/1 LV and FC 4/1 HV's configuration. Information is dynamically generated in an HTML format by the FC 2/1 LV and FC 4/1 HV so that Web browsers can access it. To access the Web interface, enter the IP address of the FC 2/1 LV and FC 4/ 1 HV into the Address field of a Web browser. Or, you can enter a URL using a host name defined by the user - for instance, http://FC 2/1 LV and FC 4/1 HV. But, the user must define the host name on the DNS server first. To make changes to settings, use standard keyboard and mouse controls to input information and then select the [Submit] button to send the changes to the FC 2/1 LV and FC 4/1 HV. A user name and password are required before any changes can be submitted. The default user name is [root] and the default password is [password]. It is recommended that you change the user name and password as soon as possible. See Ethernet Connection on page 64 for more information on setting up user names and passwords. Changes will not take effect until the next time the FC 2/1 LV and FC 4/1 HV reboots, but the unit can be forced to reboot by selecting the [Reboot] option from the Diagnostics menu. Note Resetting a bridge to factory defaults will render the bridge unable to use a gateway until the IP address and gateway are re-configured via the serial interface. This will result in a loss of connectivity during an http session. In-Band Management The FC 2/1 LV and FC 4/1 HV supports a set of SCSI-3 commands that can be received as FCP commands over the Fibre Channel bus or as SCSI commands over a SCSI bus. These commands provide support for value added features such as Copy Manager and In-Band Management. When using these Chapter 5 Chapter 5 Management Interfaces 109