HP Surestore Tape Library Model 10/180 HP Surestore Bridge FC 2/1 LV and FC 4/ - Page 82
Table 15,
View all HP Surestore Tape Library Model 10/180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Note If you do not see messages on your screen, re-check your computer's serial port settings and press [Enter] 5 or 6 times. In particular, make sure the baud rate is set to one of the values listed in Table 15 on page 80. The main menu appears as follows: HP Surestore Bridge FC 4/1 HV Version X.X XXXX 1) Perform Configuration 2) System Utilities 3) Display Trace and Assertion History 4) Reboot 5) Download a New Revision of The Firmware Command > The main menu allows for various operations to be performed on the bridge. Option 1) is described below. For information on options 2) through 5), see Chapter 5. 84 Power-Up Messages for the FC 4/1 HV Chapter 4
84
Power-Up Messages for the FC 4/1 HV
Chapter 4
Note
If you do not see messages on your screen, re-check your
computer’s serial port settings and press
[Enter]
5 or 6 times. In
particular, make sure the baud rate is set to one of the values
listed in
Table 15
on page 80.
The main menu appears as follows:
The main menu allows for various operations to be performed on the bridge.
Option 1) is described below. For information on options 2) through 5), see
Chapter 5
.
HP Surestore Bridge FC 4/1 HV
Version X.X XXXX
1) Perform Configuration
2) System Utilities
3) Display Trace and Assertion History
4) Reboot
5) Download a New Revision of The Firmware
Command >