HP Xw5000 Linux-based workstations xw5000 - xw8000 - getting started guide - Page 46

troubleshooting No. beeps component error solution 4 Video Card Graphics 1. Remove the graphics card card failure. and reseat it. 2. If the problem persists, remove the graphics card and replace it with a good card. 5 PCI Card PCI card 1. Remove PCI cards until you initialization find the one causing the problem. failure. 2. Reseat the offending PCI card. 3. If the problem persists, replace the defective PCI card. 6 BIOS Corrupted BIOS. Perform a BIOS Boot Block Recovery. See the hp workstation xw5000 and xw8000 Technical Reference Guides at http://www.hp.com/ go/workstationsupport 7 System Board Defective Contact HP Customer Care. motherboard. restoring your OS and software from CD Restore the original OS and factory-installed software by using the CDs provided with your workstation. Carefully read and follow the instructions that came with the CDs. For questions about problems with these CDs, contact HP Customer Care. Å WARNING: The operations you perform using the recover CDs permanently erase the contents of your hard disk. Always back up your data and personal files before using the recovery CDs. 3-12 getting started guide