HP t505 Administrator Guide - Page 144
Table E-14, root > Network continued
View all HP t505 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
Table E-14 root > Network (continued) Registry key Description root/Network/IPSec/IPSecRules//DstAddr Sets the destination address for the IPSec rule. root/Network/IPSec/IPSecRules// MMAuthMethod Sets the authentication method for the IPSec rule. PSK is for using a pre-shared key, and Certificate is for using certificate files. root/Network/IPSec/IPSecRules// MMAuthMethodCACert If the authentication method is Certificate, the CA certificate file path is saved in this registry key. root/Network/IPSec/IPSecRules// MMAuthMethodClientCert If the authentication method is Certificate, the client certificate file path is saved in this registry key. root/Network/IPSec/IPSecRules// MMAuthMethodPresharedKey If the authentication method is PSK, the pre-shared key value is saved in this registry key. root/Network/IPSec/IPSecRules// MMAuthMethodPrivateKey If the authentication method is Certificate, the private key file path that corresponds with the client certificate is saved in this registry key. root/Network/IPSec/IPSecRules// MMDHGroup Sets the phase 1 Diffie-Hellman group. root/Network/IPSec/IPSecRules// MMEncryptionAlg Sets the phase 1 encryption algorithm. root/Network/IPSec/IPSecRules// MMIntegrityAlg Sets the phase 1 integrity algorithm. root/Network/IPSec/IPSecRules// MMLifetimeMinutes Sets the phase 1 lifetime. root/Network/IPSec/IPSecRules// QMAHEnable Enables phase 2 AH. root/Network/IPSec/IPSecRules// QMAHIntegrityAlg Sets the phase 2 AH integrity algorithm. root/Network/IPSec/IPSecRules// QMESPEnable Enables phase 2 ESP. root/Network/IPSec/IPSecRules// QMESPEncryptionAlg Sets the phase 2 ESP encryption algorithm. root/Network/IPSec/IPSecRules// QMESPIntegrityAlg Sets the phase 2 ESP integrity algorithm. root/Network/IPSec/IPSecRules// QMLifetimeSeconds Sets the phase 2 lifetime. root/Network/IPSec/IPSecRules// RuleDescription Sets the description for the IPSec rule. root/Network/IPSec/IPSecRules// RuleEnable If set to 1, the rule is enabled. root/Network/IPSec/IPSecRules//RuleName Sets the name for the IPSec rule. root/Network/IPSec/IPSecRules//SrcAddr Sets the source address for the IPSec rule. root/Network/IPSec/IPSecRules// TunnelDstAddr Sets the tunnel destination address for the IPSec rule. root/Network/IPSec/IPSecRules// TunnelEnable Enables tunnel mode for the IPSec rule. 132 Appendix E Registry keys