Honeywell HPF24S8 Installation Instructions - Page 12

Control Input Circuits: TB4, Terminals 3 + & 4 - and 7 + & 8

Get Honeywell HPF24S8 PDF manuals and user guides View all Honeywell HPF24S8 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

System Overview Specifications • Wire size: minimum #14 AWG with 600V insulation Control Input Circuits: TB4, Terminals 3 (+) & 4 (-) and 7 (+) & 8 (-) • Trigger Input Voltage: 9 to 32 VDC • Input Current Draw in Alarm Polarity: - 16 to 32 volts, 2.0 mA maximum per input - 9 to 16 volts, 1.0 mA maximum per input NAC/Output Circuits: TB2, Terminals 1 (+) & 2 (-), 3 (+) & 4 (-), 5 (+) & 6 (-) and 7 (+) & 8 (-) alarm polarity • Supervised, Special Application and power-limited • Voltage Rating: 24 VDC filtered • Current: - Maximum for any one circuit - 3.0 amps - Maximum total continuous current for all output: HPF24S6 - 4.0 amps HPF24S8 - 6.0 amps - Maximum total short term current (one hour maximum) for all outputs: HPF24S6 - 6.0 amps HPF24S8 - 8.0 amps • Output Circuit Types: - Four Style Y NACs (require 4.7 KEnd-of-Line Resistors) or Style Z NACs using the optional ZNAC-4 Class A converter module OR - Four resettable or nonresettable 24 VDC power outputs • Refer to the Device Compatibility Document for listed compatible devices • For wiring requirements, refer to Appendix A, "Wire Requirements", on page 42. Trouble Relay Contact Rating: TB5 • Fail-safe Form-C relay (normally energized, transfers with loss of power) • 5.0 amps @ 24 VDC or 5.0 amps @ 30 VAC Secondary Power (battery) Charging Circuit: JP4 • Supervised, nonpower-limited • Supports lead acid type batteries only • Float Charge Voltage: 27.6 VDC • Maximum Charge Current: 1.5 A • Battery fuse (F1) 15A, 30V (Candadian version is nonreplaceable 12A, 32V) • Maximum Battery Capacity: 18.0 AH • Minimum Battery Capacity: 7.0 AH • Power supply draws maximum standby current of 65 mA from batteries Special Application Auxiliary Power Output: TB4 Terminals 9 (+) & 10 (-) • Special application power • Power-limited, nonsupervised • Voltage Rating: 24 VDC • Current: - 170 mA maximum with internal 7.0 Amp Hour batteries - 500 mA maximum with external 18.0 Amp Hour batteries 12 HPF24S Series Power Supplies - P/N 52751:D3 5/11/2010

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
12
HPF24S Series Power Supplies —
P/N 52751:D3
5/11/2010
System Overview
Specifications
•
Wire size: minimum #14 AWG with 600V insulation
Control Input Circuits: TB4, Terminals 3 (+) & 4 (-) and 7 (+) & 8 (-)
•
Trigger Input Voltage: 9 to 32 VDC
•
Input Current Draw in Alarm Polarity:
–
16 to 32 volts, 2.0 mA maximum per input
–
9 to 16 volts, 1.0 mA maximum per input
NAC/Output Circuits: TB2, Terminals 1 (+) & 2 (-), 3 (+) & 4 (-), 5 (+) & 6 (-) and
7 (+) & 8 (-) alarm polarity
•
Supervised, Special Application and power-limited
•
Voltage Rating: 24 VDC filtered
•
Current:
–
Maximum for any one circuit - 3.0 amps
–
Maximum total continuous
current for all output:
HPF24S6 - 4.0 amps
HPF24S8 - 6.0 amps
–
Maximum total short term
current (one hour maximum) for all outputs:
HPF24S6 - 6.0 amps
HPF24S8 - 8.0 amps
•
Output Circuit Types:
–
Four Style Y NACs (require 4.7 K
End-of-Line Resistors) or
Style Z NACs using the optional ZNAC-4 Class A converter module
OR
–
Four resettable or nonresettable 24 VDC power outputs
•
Refer to the Device Compatibility Document for listed compatible devices
•
For wiring requirements, refer to Appendix A, “Wire Requirements”, on page 42.
Trouble Relay Contact Rating: TB5
•
Fail-safe Form-C relay (normally energized, transfers with loss of power)
•
5.0 amps @ 24 VDC or 5.0 amps @ 30 VAC
Secondary Power (battery) Charging Circuit: JP4
•
Supervised, nonpower-limited
•
Supports lead acid type batteries only
•
Float Charge Voltage: 27.6 VDC
•
Maximum Charge Current: 1.5 A
•
Battery fuse (F1) 15A, 30V (Candadian version is nonreplaceable 12A, 32V)
•
Maximum Battery Capacity: 18.0 AH
•
Minimum Battery Capacity: 7.0 AH
•
Power supply draws maximum standby current of 65 mA from batteries
Special Application Auxiliary Power Output: TB4 Terminals 9 (+) & 10 (-)
•
Special application power
•
Power-limited, nonsupervised
•
Voltage Rating: 24 VDC
•
Current:
–
170 mA maximum with internal 7.0 Amp Hour batteries
–
500 mA maximum with external 18.0 Amp Hour batteries