Honeywell HPF24S8 Installation Instructions - Page 46

46

HPF24S Series Power Supplies —

P/N 52751:D3

5/11/2010

Wire Requirements

HPF24S Device Compatibility

A.1.4

Notification Appliances For Canadian Applications

•

Refer to manufacturer’s installation instructions for more information.

•

Contact manufacturer for current draws or additional options

System Sensor

Gentex

Strobe lights, synchronizable type

, Models ST24-15, -15/75, -30, -60, -75, -110; Models GES24-

15, -15/75, -30, -60, -75, -110, -177. Models may be followed by suffix -P (plain), followed by W

(wall), followed by W or R (white or red color). Intended for indoor use on a wall.

MT-24-IS-VFR, MT-24-LS-VFR, MT-24-LSM-VFR, MT-24-MS-VFR MultiTone Strobe

MT-24-SL-VFR, MT-24-SLM-VFR Multi-tone/Strobe

MT4-24-IS-VFR, MT4-24-LS-VFR, MT4-24-LSM-VFR, MT4-24-MS-VFR MultiTone Strobe

NS-2415W-FR, NS-2430W-FR, NS-2475W-FR, NS-24110W-FR NS-241575W-FR Horn Strobe

NS4-2415W-FR, NS4-2430W-FR, NS4-2475W-FR, NS4-24110W-FR, NS4-241575W-FR, NS4-24MCW-

FR, NS-24MCW-FW, NS-24MCW-FR Horn Strobe

RS-1230, RS-2415, RS-2430, RS-2475, RS-24110, RS-241575 Strobe

RS-2415W, RS-241575W Strobe

RSS-2415W, RSS-2415/75W, RSS-2430W, RSS-2475W, RSS-24110W Strobe

RSS-24MCW-FR/

FW

Strobe

RSS-2415-CR-FW, RSS-2430-CR-FW, RSS-2475-CR-FW, RSS-24100-CR-FW Strobe

RSS-24150-CR-FW, RSS-24177-CR-FW Strobe

RSSP-24MCW-FR

/FW

strobe

RSSP-2415W, RSSP-2415/75W, RSSP-2430W, RSSP-24185W Strobe

SCM-24-R Synchronized Controller Module

SHW-24-HFR, SH2W-24-HFR, SHPW-24-HFR Strobe

SL-24-VFR, SL1-24-VFR, SL3-24-VFR, SLP-24-VFR Strobe

SLM-24-VFR, SL1M-24-VFR, SL3M-24-VFR, SLPM-24-VFR Strobe

SM-12/24 Synchronization Module

SR-2415, SR-241575 Synchronized Strobe

WMT-24-FR, WM1T-24-FR, WM3T-24-FR Strobes

AS-24MCC-FW, CH90-24-MCC-FW, E90-24MCC-FW, ET90-24MCC-FW, HS-24-R/W,

MIZ-24S-R/W, RSS-24MCC-FW,

NH-12/24R/W

MODEL NUMBER & NOMENCLATURE (Cooper-Wheelock)

MDLA / MDLWA Sync Modules, H24A, P1224MCA, P2415A, P241575A, P2475A, P24110A, PC2415A, PC241575A,

PC2430A, PC2475A, PC24115A, PC24177AS1224MCA, S2415A, S241575A, S2475A, SC24110A, SC2415A,

SC241575A, SC2430A, SC2475A, SC2495A, SC24115A, SC24177A,

SSM24-6A, SSM24-8A, SSM24-10A - Alarm Bells

CHWA, CHRA, HRA, HWA, SRA, SWA, SCRA, SCWA, SRHA, SWHA, SCRHA, SCWHA, P2RA, P2WA, PC2RA,

PC2WA, P4RA, P4WA, PC4RA, PC4WA, CHSRA, CHSWA

Section	Page
Table of Contents	5
Section 1: System Overview	9
1.1 General	9
1.2 Features	9
1.3 Start-up Procedure	10
1.4 Jumpers	11
1.4.1 Jumper JP1 - Ground Fault Detection	11
1.4.2 Jumpers JP2 and JP3: Coded/Noncoded Input Selection	11
1.5 LED Indicators	11
1.6 Specifications	11
Primary AC Power - TB1	11
Control Input Circuits: TB4, Terminals 3 (+) & 4 (-) and 7 (+) & 8 (-)	12
NAC/Output Circuits: TB2, Terminals 1 (+) & 2 (-), 3 (+) & 4 (-), 5 (+) & 6 (-) and 7 (+) & 8 (-) alarm polarity	12
Trouble Relay Contact Rating: TB5	12
Secondary Power (battery) Charging Circuit: JP4	12
Special Application Auxiliary Power Output: TB4 Terminals 9 (+) & 10 (-)	12
1.7 General	14
Section 2: Installation	15
2.1 Backbox Mounting	15
2.2 NAC Circuit Wiring	17
2.2.1 Style Y (Class B)	17
2.2.2 ZNAC-4 Class A Option Module	17
2.3 Addressable Module Mounting	18
2.4 NEC Power-limited Wiring Requirements	19
Section 3: Programming Options	20
3.1 DIP Switch Settings	21
3.2 Programmable Features Description	22
3.2.1 Synchronization Type Selection	22
Maximum Number of Strobes for Synchronization	22
3.2.2 Synchronization Mode - Master/Slave	22
3.2.3 AC Fail Delay/Aux. Trouble Relay Function	23
3.2.4 Input/Output Function	23
Special Application Auxiliary Power Control	24
3.2.5 Charger Enable/Disable	24
3.2.6 Door Closers	24
Section 4: Trouble Supervision	25
4.1 Supervision via FACP Notification Appliance Circuit	25
4.1.1 Supervision of FACP to HPF24S Wiring	25
4.1.2 Supervision of HPF24S Faults	25
4.1.3 Aux.Trouble Relay/AC Fail Relay	25
4.2 AC Loss Reporting Delay	26
Section 5: Applications	28
5.1 Controlling Four NACs With One Input and Selective Silence	28
5.2 Controlling Three NACs and One Door Holder With One Input	30
5.3 Split Temporal Mode of Operation	32
5.4 Remote Supply With Resettable and Nonresettable Power	33
5.5 Master FACP With Slave HPF24S Power Supply	35
5.6 Master HPF24S Power Supply Connected to FACP	36
5.7 Canadian Applications	37
Section 6: Power Supply Requirements	38
6.1 Overview	38
6.2 Calculating the AC Branch Circuit	38
6.3 Calculating the System Current Draw	38
6.3.1 Overview	38
6.3.2 How to Calculate System Current Draw	39
6.4 Calculating the Battery Size	40
6.4.1 NFPA Battery Requirements	41
6.4.2 Selecting and Locating Batteries	41
Appendix A: Wire Requirements	42
A.1 HPF24S Device Compatibility	43
A.1.1 System Sensor - 24VDC	43
System Sensor SpectrAlert Advance	43
System Sensor SpectrAlert Advance Speakers	44
A.1.2 Gentex - 24VDC	44
A.1.3 Cooper-Wheelock - 24VDC	45
A.1.4 Notification Appliances For Canadian Applications	46
System Sensor	46
Gentex	46
Cooper-Wheelock	47

Honeywell HPF24S8 Installation Instructions - Page 46

A.1.4, Notification Appliances For Canadian Applications

Page 46 highlights