IBM 7945E2U User Manual - Page 115
and the socket., Handle the microprocessor carefully. Dropping the microprocessor during
View all IBM 7945E2U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
8. Install the microprocessor: a. Rotate the microprocessor release lever on the socket from its closed and locked position until it stops in the fully open position. b. Rotate the hinged microprocessor bracket frame into the open position. c. Remove the microprocessor socket dust cover from the surface of the microprocessor socket, if one is present. Store the dust cover in a safe place. d. Touch the static-protective package that contains the microprocessor to any unpainted metal surface on the server. Then, remove the microprocessor from the package. Attention: v Do not touch the microprocessor contacts; handle the microprocessor by the edges only. Contaminants on the microprocessor contacts, such as oil from your skin, can cause connection failures between the contacts and the socket. v Handle the microprocessor carefully. Dropping the microprocessor during installation or removal can damage the contacts. v Do not use excessive force when you press the microprocessor into the socket. v Make sure that the microprocessor is oriented and aligned and positioned in the socket before you try to close the lever. e. If there is a plastic protective cover on the bottom of the microprocessor, carefully remove it. Chapter 2. Installing optional devices 99