IBM 7945E2U User Manual - Page 67
Installing the full-length-adapter bracket
View all IBM 7945E2U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Installing the full-length-adapter bracket If you are installing a full-length adapter in the upper riser-card PCI slot, you must first install the full-length-adapter bracket in the end of the riser-card assembly. To install the full-length-adapter bracket, complete the following steps: 1. Orient the riser-card assembly as shown. 2. Remove the full-length-adapter bracket from the storage location. a. Press the bracket tab 3 and slide the bracket toward the end of the riser-card assembly. b. Push the bracket out of the storage location on the riser-card assembly. 3. Align the bracket with the end of the riser-card assembly as shown. 4. Place the two hooks 1 in the two openings 2 in the end of the riser-card assembly. 5. Press the bracket tab 3 and slide the bracket to the right until it clicks into place. 6. Return to the adapter-installation instructions. Storing the full-length-adapter bracket If you are removing a full-length adapter in the upper riser-card PCI slot and will replace it with a shorter adapter or no adapter, you must remove the full-length-adapter bracket from the end of the riser-card assembly and return the bracket to its storage location. To remove and store the full-length-adapter bracket, complete the following steps: 1. Press the bracket tab 3 and slide the bracket to the left until the bracket falls free of the riser-card assembly. 2. Align the bracket with the storage location on the riser-card assembly as shown. 3. Place the two hooks 1 in the two openings 2 in the storage location on the riser-card assembly. Chapter 2. Installing optional devices 51