IBM 7945E2U User Manual - Page 70
Attention, Connect any required cables to the adapter.
View all IBM 7945E2U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Adapter Expansion-slot cover PCI riser-card assembly 7. Install the adapter: a. If the adapter is a full-length adapter for the upper expansion slot in the riser card, remove the full-length-adapter bracket from underneath the top of the riser-card assembly and insert it in the end of the upper expansion slot of the riser-card assembly. See "Installing the full-length-adapter bracket" on page 51 for instructions. b. Align the adapter with the adapter connector on the riser-card and the guide on the external end of the PCI riser-card assembly. c. Press the adapter firmly into the adapter connector on the riser card. 8. Connect any required cables to the adapter. Attention: v When you route cables, do not block any connectors or the ventilated space around any of the fans. v Make sure that cables are not routed on top of components that are under the PCI riser-card assembly. v Make sure that cables are not pinched by the server components. 9. Align the PCI riser-card assembly with the selected PCI riser-card connector on the system board. 54 System x3650 M3 Types 4255, 7945, and 7949: Installation and User's Guide