IBM 7945E2U User Manual - Page 36
AC power-supply LEDs, Description, Action, Notes, Error
View all IBM 7945E2U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Table 2. Power-supply LEDs AC power-supply LEDs AC DC Error Off Off Off Off Off On Off On Off Off On On On Off Off On Off or On Flashing On On Off On On On Description Action No ac power to the server or a problem with the ac power source 1. Check the ac power to the server. 2. Make sure that the power cord is connected to a functioning power source. 3. Turn the server off and then turn the server back on. 4. If the problem remains, replace the power supply. No ac power to the server or a problem with the ac power source and the power supply had detected an internal problem 1. Replace the power supply. 2. Make sure that the power cord is connected to a functioning power source. Faulty power supply Replace the power supply. Faulty power supply Replace the power supply. Power supply not 1. (Trained service technician only) fully seated, Reseat the power supply. faulty system board, or faulty power supply 2. If a power channel error LED on the system board is not lit, replace the power-supply (see the documentation that comes with the power supply for instructions). 3. If a power channel error LED on the system board is lit, (trained service technician only) replace the system board. Faulty power supply Replace the power supply. Normal operation Power supply is faulty but still operational Replace the power supply. Notes This is a normal condition when no ac power is present. This happens only when a second power supply is providing power to the server. Typically indicates that a power supply is not fully seated. The following table describes the problems that are indicated by various combinations of the power-supply LEDs on a dc power supply and suggested actions to correct the detected problems. 20 System x3650 M3 Types 4255, 7945, and 7949: Installation and User's Guide