IBM 7945E2U User Manual - Page 170

Using the remote presence capability and blue-screen capture, Boot Manager, Add Boot Option

Get IBM 7945E2U PDF manuals and user guides View all IBM 7945E2U manuals
Add to My Manuals
Save this manual to your list of manuals

Page 170 highlights

USB hypervisor connector PCI Express SAS controller connector SAS controller error LED SAS riser card To start using the embedded hypervisor functions, you must add the USB memory key to the startup sequence in the Setup utility. To add the USB hypervisor memory key to the boot order, complete the following steps: 1. Turn on the server. Note: Approximately 3 minutes after the server is connected to ac power, the power-control button becomes active. 2. When the prompt Setup is displayed, press F1. 3. From the Setup utility main menu, select Boot Manager. 4. Select Add Boot Option; then, select Hypervisor. Press Enter, and then press Esc. 5. Select Change Boot Order and then select Commit Changes; then, press Enter. 6. Select Save Settings and then select Exit Setup. If the embedded hypervisor image becomes corrupt, you can use the VMware Recovery CD that comes with the server to recover the image. To recover the flash device image, complete the following steps: 1. Turn on the server. Note: Approximately 3 minutes after the server is connected to ac power, the power-control button becomes active. 2. Insert the VMware Recovery CD into the CD or DVD drive. 3. Follow the instructions on the screen. For additional information and instructions, see the VMware ESXi Server 3i Embedded Setup Guide at http://www.vmware.com/pdf/vi3_35/esx_3i_e/r35/ vi3_35_25_3i_setup.pdf/. Using the remote presence capability and blue-screen capture The remote presence and blue-screen capture features are integrated functions of the integrated management module (IMM). When an optional virtual media key is installed in the server, it activates full systems-management functions. The virtual media key is required to enable the integrated remote presence and blue-screen capture features. Without the virtual media key, you cannot remotely mount or unmount drives or images on the client system. However, you still can access the Web interface without the key. After the virtual media key is installed in the server, it is authenticated to determine whether it is valid. If the key is not valid, you receive a message from the Web interface (when you attempt to start the remote presence feature) indicating that the hardware key is required to use the remote presence feature. 154 System x3650 M3 Types 4255, 7945, and 7949: Installation and User's Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
USB hypervisor
connector
PCI Express SAS
controller connector
SAS controller
error LED
SAS riser
card
To start using the embedded hypervisor functions, you must add the USB memory
key to the startup sequence in the Setup utility.
To add the USB hypervisor memory key to the boot order, complete the following
steps:
1.
Turn on the server.
Note:
Approximately 3 minutes after the server is connected to ac power, the
power-control button becomes active.
2.
When the prompt
<F1> Setup
is displayed, press F1.
3.
From the Setup utility main menu, select
Boot Manager
.
4.
Select
Add Boot Option
; then, select
Hypervisor
. Press Enter, and then press
Esc.
5.
Select
Change Boot Order
and then select
Commit Changes
; then, press
Enter.
6.
Select
Save Settings
and then select
Exit Setup
.
If the embedded hypervisor image becomes corrupt, you can use the
VMware
Recovery
CD that comes with the server to recover the image. To recover the flash
device image, complete the following steps:
1.
Turn on the server.
Note:
Approximately 3 minutes after the server is connected to ac power, the
power-control button becomes active.
2.
Insert the
VMware Recovery
CD into the CD or DVD drive.
3.
Follow the instructions on the screen.
For additional information and instructions, see the
VMware ESXi Server 3i
Embedded Setup Guide
vi3_35_25_3i_setup.pdf/.
Using the remote presence capability and blue-screen capture
The remote presence and blue-screen capture features are integrated functions of
the integrated management module (IMM). When an optional virtual media key is
installed in the server, it activates full systems-management functions. The virtual
media key is required to enable the integrated remote presence and blue-screen
capture features. Without the virtual media key, you cannot remotely mount or
unmount drives or images on the client system. However, you still can access the
Web interface without the key.
After the virtual media key is installed in the server, it is authenticated to determine
whether it is valid. If the key is not valid, you receive a message from the Web
interface (when you attempt to start the remote presence feature) indicating that the
hardware key is required to use the remote presence feature.
154
System x3650 M3 Types 4255, 7945, and 7949: Installation and User’s Guide