IBM 7945E2U User Manual - Page 84
to the hard disk drive backplanes.
View all IBM 7945E2U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
4. Remove the two 4-drive filler panels that are to the right of drive bay 8, beneath the IDs 8 - 15 on the front bezel. 5. To obtain more working room, remove fans 2 and 3 (see "Removing a hot-swap fan" on page 115). 6. Pull the hard disk drives or fillers out of the server slightly to disengage them from the backplanes. For more information, see"Removing a hard disk drive" on page 59. 7. Disconnect the SAS signal cables from the SAS controller, which is connected to the SAS riser-card. Leave the other end of the SAS signal cables connected to the hard disk drive backplanes. 8. Remove the SAS controller assembly from the server; then, remove the SAS controller from the SAS riser-card. See "Removing a ServeRAID SAS controller from the SAS riser-card" on page 121 for instructions. 68 System x3650 M3 Types 4255, 7945, and 7949: Installation and User's Guide