IBM 7945E2U User Manual - Page 90
Remove the interposer card and the loose screw from the bag., connector on the SAS controller
View all IBM 7945E2U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
19. If a battery and battery carrier are attached to the SAS controller that you removed in step 8, disconnect the battery carrier cable from the battery and remove the three screws that secure the battery carrier to the SAS controller. Set the battery and battery carrier aside. Note: The illustrations in this document might differ slightly from your hardware. 20. Install the interposer card that comes with the option kit on the interposer card connector on the SAS controller: a. Remove the interposer card and the loose screw from the bag. b. Rotate the standoff so that it aligns with the hole in the ServeRAID controller, and position the interposer card connector over the SAS controller connector. c. Press the interposer card down onto the interposer card connector so that the interposer card is secured. 74 System x3650 M3 Types 4255, 7945, and 7949: Installation and User's Guide