IBM 7945E2U User Manual - Page 49
System-board LEDs, System pulse LEDs
![]() |
View all IBM 7945E2U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
System-board LEDs The following illustration shows the light-emitting diodes (LEDs) on the system board. Note: Error LEDs remain lit only while the server is connected to power. System pulse LEDs The following LEDs are on the system board and monitor the system power-on and power-off sequencing and boot progress (see "System-board LEDs" for the location of these LEDs). Table 6. System-pulse LEDs LED Description Action Enclosure manager heartbeat Indicates the status of (Trained service technician power-on and power-off only) If the server is sequencing. connected to power and the LED is not flashing, replace When the server is the system board. connected to power, this LED flashes slowly to indicate that the enclosure manager is working correctly. Chapter 2. Installing optional devices 33
![](/manual_guide/products/ibm-7945b2u-user-manual-ae785ae/49.png)