IBM 7945E2U User Manual - Page 73
Installing an IBM Virtual Media Key, Remove the cover see Removing the cover
View all IBM 7945E2U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
6. Carefully grasp the adapter by its top edge or upper corners, and pull the adapter from the PCI expansion slot. If you have other devices to install or remove, do so now. Otherwise, go to "Completing the installation" on page 139. Installing an IBM Virtual Media Key The optional IBM Virtual Media Key enables the IMM remote presence and blue-screen capture capability. This feature provides graphical console redirection with remote keyboard and mouse interaction, plus remote diskette and CD/DVD drive support. To install a virtual media key, complete the following steps: 1. Read the safety information that begins on page vii and "Installation guidelines" on page 37. 2. Turn off the server and peripheral devices and disconnect all power cords and external cables (see "Turning off the server" on page 22). 3. Remove the cover (see "Removing the cover" on page 44). 4. Align the mounting bracket on the rear of the virtual media key with the mounting tab and slide it down the tab onto the virtual medial key connector on the system board. Press the virtual media key down into the connector until it is firmly seated on the system board. If you have other devices to install or remove, do so now. Otherwise, go to "Completing the installation" on page 139. Chapter 2. Installing optional devices 57