IBM 7945E2U User Manual - Page 116
socket. Twist the handle of the microprocessor tool counterclockwise
View all IBM 7945E2U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Protective cover Microprocessor f. Locate the microprocessor installation tool that comes with the new microprocessor. g. Twist the handle of the installation tool counterclockwise so that it is in the open position. h. Align the triangle alignment mark on the microprocessor installation tool with the triangle alignment mark on the microprocessor, then place the microprocessor on the underside of the tool so that the tool can grasp the microprocessor correctly onto the bottom of the installation tool. i. Twist the handle of the installation tool clockwise to secure the microprocessor in the tool. Note: You can pick up or release the microprocessor by twisting the microprocessor installation tool handle. Handle Installation tool Microprocessor j. Carefully align the microprocessor installation tool over the microprocessor socket. Twist the handle of the microprocessor tool counterclockwise to insert the microprocessor into the socket. Attention: The microprocessor fits only one way on the socket. You must place a microprocessor straight down on the socket to avoid damaging the pins on the socket. The pins on the socket are fragile. Any damage to the pins may require replacing the system board. 100 System x3650 M3 Types 4255, 7945, and 7949: Installation and User's Guide