IBM 7945E2U User Manual - Page 144
adapter on Install the PCI riser-card assembly in the server see Installing a PCI
View all IBM 7945E2U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
d. From the other side of the ServeRAID controller, insert and tighten the screw to secure the interposer card to the ServeRAID controller. 8. Connect one end of the remote battery cable to the interposer card. Attention: To avoid damage to the hardware, make sure that you align the black dot on the cable connector with the black dot on the connector on the interposer card. Do not force the remote battery cable into the connector. 9. Install the ServeRAID controller on the riser card (see "Installing a PCI adapter" on page 52). 10. Install the PCI riser-card assembly in the server (see "Installing a PCI riser-card assembly" on page 46). 11. Connect the remote battery cable to the battery carrier. Attention: To avoid damage to the hardware, make sure that you align the black dot on the cable connector with the black dot on the connector on the interposer card. Do not force the remote battery cable into the connector. 128 System x3650 M3 Types 4255, 7945, and 7949: Installation and User's Guide