IBM 7945E2U User Manual - Page 89
Insert the front of the SAS expander card into the front retention bracket.
View all IBM 7945E2U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
a. Align the retention bracket controller slot so that it faces the rear of the server. b. Place the bracket tabs in the holes on the chassis and slide the bracket to left until it clicks into place. 17. Remove the fillers (if they are installed) from the four connectors on the SAS expander card that comes with the option kit. 18. Install the SAS expander card: a. Insert the SAS expander card into the connector on the SAS riser-card. b. Insert the front of the SAS expander card into the front retention bracket. c. Install the SAS riser-card with the SAS expander card into the connector on the system board, making sure that the alignment post goes through the hole in the expander card. Press the riser card into place until the latch at the rear of the card snaps closed. Chapter 2. Installing optional devices 73