IBM 7945E2U User Manual - Page 69
Video Unified Extensible Firmware Interface UEFI fixed, System board Ethernet 2 PXE fixed
View all IBM 7945E2U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
If you install a different supported riser-card assembly, the supported adapter types might be different. For a list of supported riser-card assemblies, see http://www.ibm.com/servers/eserver/serverproven/compat/us/. v The system scans devices in the following order, if you have not changed the default boot precedence: - Video Unified Extensible Firmware Interface (UEFI) (fixed) - System board Ethernet 1 PXE (fixed) - System board Ethernet 2 PXE (fixed) - System board SAS (or RAID) The following illustration shows the adapter connectors on the PCI riser-card assembly. Adapter PCI riser-card assembly Adapter connectors To install a PCI adapter, complete the following steps: 1. Read the safety information that begins on page vii and "Installation guidelines" on page 37. 2. Turn off the server and peripheral devices and disconnect all power cords and external cables (see "Turning off the server" on page 22). 3. Remove the cover (see "Removing the cover" on page 44). 4. Determine which expansion slot you will use for the adapter. 5. If you are installing an adapter in PCI expansion slot 1 or 2, remove PCI riser-card assembly 1; if you are installing an adapter in PCI expansion slot 3 or 4, remove PCI riser-card assembly 2. See "Removing a PCI riser-card assembly" on page 45. 6. Slide the expansion-slot cover out of the PCI riser-card assembly expansion slot. Chapter 2. Installing optional devices 53