IBM DJSA-210 Hard Drive Specifications - Page 104
Set Max Inactive, Set Max Unlocked, Set Max Frozen, Set Max SET PASSWORD, Set Max FREEZE LOCK
View all IBM DJSA-210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
This command requests a transfer of a single sector of data from the host. The figure shown above defines the content of this sector of information. The password supplied in the sector of data transferred is compared with the stored Set Max password. If the password compare fails, then the device returns command aborted and decrements the unlock counter. On the acceptance of the Set Max LOCK command, this counter is set to a value of five and is decremented for each password mismatch when Set Max UNLOCK is issued and the device is locked. When this counter reaches zero, then the Set Max UNLOCK command returns command aborted until a power cycle. The Set Max FREEZE LOCK command allows the host to disable the SET MAX commands (including Set Max UNLOCK) until the next power cycle. When this command is accepted the device is in the Set Max Frozen mode. The Set Max password, the Set Max security mode and the unlock counter don't persist over a power cycle but persist over a hardware or software reset. NOTE: If this command is immediately preceded by a Read Native MAX ADDRESS command regardless of Feature register value, it shall be interpreted as a Set Max ADDRESS command. Set Max Frozen Set Max Locked Set Max FREEZE LOCK Set Max Unlocked Set Max LOCK Set Max UNLOCK Set Max Inactive Set Max SET PASSWORD Figure 66. Set Max security mode transition Travelstar 32GH/30GT/20GN hard disk drive specifications 90