IBM DJSA-210 Hard Drive Specifications - Page 142
Read DMA C8h/C9h, Output Parameters To The Device, Sector Count, Sector Number, Cylinder High/Low
View all IBM DJSA-210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
13.13 Read DMA (C8h/C9h) Command Block Output Registers Register 7 6 5 4 3 2 1 0 Data Feature Sector Count V V V V V V V V Sector Number V V V V V V V V Cylinder Low V V V V V V V V Cylinder High V V V V V V V V Device/Head 1 L 1 D H H H H Command 1 1 0 0 1 0 0 R Command Block Input Registers Register 7 6 5 4 3 2 1 0 Data Error see below Sector Count V V V V V V V V Sector Number V V V V V V V V Cylinder Low V V V V V V V V Cylinder High V V V V V V V V Device/Head - - - - H H H H Status see below Error Register 76543210 CRC UNC 0 IDN 0 ABT T0N AMN VV0V0V0V Status Register 7 6 5 4 3 2 10 BSY RDY DF DSC DRQ COR IDX ERR 0 V 0 V - 0 -V Figure 86. Read DMA command (C8h/C9h) The Read DMA command reads one or more sectors of data from disk media, then transfers the data from the device to the host. The sectors are transferred through the Data Register 16 bits at a time. The host initializes a slave-DMA channel prior to issuing the command. The data transfers are qualified by the DMARQ and are performed by the slave-DMA channel. The device issues only one interrupt per command to indicate that the data transfer has terminated and that status is available. If an uncorrectable error occurs, the read will be terminated at the failing sector. Output Parameters To The Device Sector Count This indicates the number of continuous sectors to be transferred. If zero is specified, then 256 sectors will be transferred. Sector Number This indicates the sector number of the first sector to be transferred. (L = 0) In LBA mode, this register specifies that LBA address bits 0-7 are to be transferred. (L = 1) Cylinder High/Low This indicates the cylinder number of the first sector to be transferred. (L = 0) In LBA mode, this register specifies LBA address bits 8-15 (Low) and 16-23 (High) to be transferred. (L = 1) Travelstar 32GH/30GT/20GN hard disk drive specifications 128