IBM DJSA-210 Hard Drive Specifications - Page 55
Electrical interface specifications, 1 Cabling, 2 Interface connector - cable
View all IBM DJSA-210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
7.0 Electrical interface specifications 7.1 Cabling The maximum cable length from the host system to the hard disk drive shall not exceed 18 inches. 7.2 Interface connector The signal connector for AT attachment is designed to mate with the 50 pin plug specified in Annex A, Connectors and Cable Assembly, of the ATA/ATAPI-5 document. The figure below and Figure 6.5.2 on page 31 show the connector location and physical pin location. Pin 43 19 1 CA 44 22 2 DB Pin Note 1: Pin position 20 is left blank for correct connector insertion. Note 2: Pin positions A, B, C, and D are used for drive address setting. (Refer to Figure 45 on page 57 for correct address setting.) Figure 32. Interface connector pin assignments Travelstar 32GH/30GT/20GN hard disk drive specifications 41