IBM DJSA-210 Hard Drive Specifications - Page 193
Write DMA CAh/CBh
View all IBM DJSA-210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 193 highlights
13.36 Write DMA (CAh/CBh) Command Block Output Registers Register 7 6 5 4 3 2 1 0 Data Feature Sector Count V V V V V V V V Sector Number V V V V V V V V Cylinder Low V V V V V V V V Cylinder High V V V V V V V V Device/Head 1 L 1 D H H H H Command 1 1 0 0 1 0 1 R Error Register 76543210 CRC UNC 0 IDN 0 ABT T0N AMN V00V0V00 Command Block Input Registers Register 7 6 5 4 3 2 1 0 Data Error see below Sector Count V V V V V V V V Sector Number V V V V V V V V Cylinder Low V V V V V V V V Cylinder High V V V V V V V V Device/Head - - - - H H H H Status see below Status Register 7 6 5 4 3 2 10 BSY RDY DF DSC DRQ COR IDX ERR 0 V V V - 0 -V Figure 125. Write DMA command (CAh/CBh) The Write DMA command transfers one or more sectors of data from the host to the device and then the data is written to the disk media. The sectors of data are transferred through the Data Register 16 bits at a time. The host initializes a slave-DMA channel prior to issuing the command. Data transfers are qualified by DMARQ and are performed by the slave-DMA channel. The device issues only one interrupt per command to indicate that data transfer has terminated and status is available. If an uncorrectable error occurs, the write will be terminated at the failing sector. Output Parameters To The Device Sector Count This indicates the number of continuous sectors to be transferred. If zero is specified, then 256 sectors will be transferred. Sector NumberThis indicates the sector number of the first sector to be transferred. (L = 0) In LBA mode this register contains the LBA bits 0-7. (L = 1) Cylinder High/Low This indicates the cylinder number of the first sector to be transferred. (L = 0) In LBA mode this register contains the LBA bits 8-15 (Low) and bits 16-23 (High). (L = 1) Travelstar 32GH/30GT/20GN hard disk drive specifications 179