IBM DJSA-210 Hard Drive Specifications - Page 157
Security Erase Unit F4h
View all IBM DJSA-210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
13.22 Security Erase Unit (F4h) Command Block Output Registers Register 7 6 5 4 3 2 1 0 Data Feature Sector Count Sector Number Cylinder Low Cylinder High Device/Head 1 - 1 D - - - - Command 1 1 1 1 0 1 0 0 Command Block Input Registers Register 7 6 5 4 3 2 1 0 Data Error see below Sector Count Sector Number Cylinder Low Cylinder High Device/Head Status see below Error Register 76543210 CRC UNC 0 IDN 0 ABT T0N AMN 000V0V00 Status Register 7 6 5 4 3 2 10 BSY RDY DF DSC DRQ COR IDX ERR 0 V 0 V - 0 -V Figure 96. Security Erase Unit command (F4h) The Security Erase Unit command initializes all user data sectors and then disables the device lock function. Note that the Security Erase Unit command initializes from LBA 0 to Native MAX LBA. The Host MAX LBA is set by the Initialize Drive Parameter or the Set MAX ADDRESS command is ignored. The protected area by the Set MAX ADDRESS command is also initialized. This command requests the transfer of a single sector of data from the host including information specified in Figure 96. If the password does not match then the device rejects the command with an Aborted error. Word 00 01-16 17-255 Description Control Word bit 0 : Identifier (1- Master, 0- User) bit 1-15 : Reserved Password ( 32 bytes ) Reserved Figure 97. Erase Unit information Travelstar 32GH/30GT/20GN hard disk drive specifications 143