IBM DJSA-210 Hard Drive Specifications - Page 148
Read Native Max ADDRESS F8h, Indicates that the bit is not used.
View all IBM DJSA-210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
13.16 Read Native Max ADDRESS (F8h) Command Block Output Registers Register 7 6 5 4 3 2 1 0 Data Feature Sector Count Sector Number Cylinder Low Cylinder High Device/Head 1 L 1 D - - - - Command 1 1 1 1 1 0 0 0 Error Register 76543210 CRC UNC 0 IDN 0 ABT T0N AMN 00000V00 Command Block Input Registers Register 7 6 5 4 3 2 1 0 Data Error see below Sector Count Sector Number V V V V V V V V Cylinder Low V V V V V V V V Cylinder High V V V V V V V V Device/Head - - - - H H H H Status see below Status Register 7 6 5 4 3 2 10 BSY RDY DF DSC DRQ COR IDX ERR 0 V 0 - - 0 -V Figure 89. Read Native Max ADDRESS (F8h) This command returns the native max LBA/CYL of HDD which is not effected by the Set Max ADDRESS command. Even if the Address Offset mode is enabled, the native max LBA/CYL of HDD is returned. Output Parameters To The Device L LBA mode. This indicates the addressing mode. An L = 0 specifies CHS mode and L = 1 specifies the LBA addressing mode. D This is the device number bit. Indicates that the device number bit of the Device/Head Register should be specified. D = 0 selects the master device and D = 1 selects the slave device. - Indicates that the bit is not used. Input Parameters From The Device Sector Number In LBA mode this register contains the native max LBA bits 0-7. (L = 1) In CHS mode this register contains the native max sector number. (L = 0) Cylinder High/Low In LBA mode this register contains the native max LBA bits 8-15 (Low) and bits 16-23 (High). (L = 1) In CHS mode this register contains the native max cylinder number. (L = 0) Travelstar 32GH/30GT/20GN hard disk drive specifications 134